MDF lacquer finish door panels can be finished in either high gloss or matte. A variety of color options is available.
Normally, urban quality postmodern lacquer finish door panels are manufactured with an 18mm thick MDF or solid wood panel as core and your choice of color that is applied to front face and edges of the door, the back face is finished by melamine in matte color matched. Optionally both faces can be Lacquered; however, the front side will be glossy and the back side will be a matte finish of the matching color.
In modern techniques, lacquer means a range of clear or colored wood finishes that dry by solvent evaporation or a curing process that produces a hard, durable finish. The finish can be of any sheen level from ultra matte to a high gloss, and it can be further polished as required. It is also used for “lacquer paint”, which is a paint that typically dries better on a hard and smooth surface.(quoted from wiki)
Our lacquer finish is processed with six rounds of spraying. As there are optional core materials for a lacquer finish, we adopt different stain on the different core material. Red oak has a beautiful natural wood grain, so we use semi-transparent stain or on it to bring out its natural wood grain. The solid color stain is used on aspen wood and rubber wood to cover their natural imperfections. As for engineered wood panel (MDF and HDF), various solid color options are available, either in gloss or in matte. we are the professional elegant middle class lacquer finish door panels factory direct, solid wood lacquer finish door panels manufacturer, welcome to consult the price of red oak/aspen wood lacquer finish door panels.
Undergoing through six rounds of spraying lacquer and a strict process, multiple coats of lacquer dries and solidifies to form a coating covering on the core material. It could cover 5 of 6 sides of panel or all sides. This coating gives the core panel a beautiful and protective surface.
There are over sixty color options in either high gloss or matte for lacquer coating. With a trusted and certified source of lacquer, these beautiful colors can remain clear for many years without discoloration.
This urban quality postmodern lacquer finish door panels are also resistant to moisture, heat, and insect. And Low maintenance for lacquer finish cabinet is required.
Options of core material for MDF lacquer finish door panels are various. You can choose solid wood, like red oak or aspen wood, as core material for kitchen cabinets door or drawer fronts. Engineered wood panels, like MDF or HDF, are also available for a lacquer finish. Solid wood is a natural material, so it is a hundred percent eco-friendly. As for MDF or HDF, only trusted and certified sources we use. All of our MDF and HDF are eco-friendly that comply with European class E1 standard (Formaldehyde emission for MDF/HDF: ≤ 1.5mg/L). Prior to spraying lacquer, all core materials must go through the sanding process to ensure their surfaces are even and good for spraying lacquer.
The use of lacquer on wood is a common practice to give the wood a wonderful finish.
* a wide variety of options of color, from gloss to matte
* semi-transparent stain can bring out the characteristic of the natural wood grain where other finish could not achieve it.
* recoating. Lacquer also offers the advantage that it can be recoated without causing any other problems. The recoating will adhere to the older lacquer, and you will get good clarity with the recoating.
* lacquer coating is resistant to moisture, heat, and insect.
* lacquer finish kitchen requires low maintenance.
we are the professional elegant middle class lacquer finish door panels factory direct, solid wood lacquer finish door panels manufacturer, welcome to consult the price of red oak/aspen wood lacquer finish door panels.
Core material: 18mm MDF/HDF/solid wood
Coating: lacquer, coating over 5 of 6 sides or all sides
Edge banding: N/A